Power hydraulics
- ALHP2/2-B0-X-20/8-T0-E1/E0-E-06 HYDRAULIC PUMPGroup 2 hydraulic pump, two-section, right rotation, flange: mounting bolt spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, displacement: 20 + 8 cm3/rev, capacity (at 1500 rpm): 30 l/min + 12 l/min, ports: 1 section "diamond" suction: 4xM8, spacing 40 mm, discharge: 4xM6, spacing 30 mm, 2 section "diamond" suction: 4xM6, spacing 30 mm, discharge: 4xM6, spacing 30 mm
Cross numbers:
211.22.031.0C, 111.20.301.00, 114090009, 1112030100, 22P19/8H08786 Learn More - ALHP2-B0-Y-25-T0-F1-06 HYDRAULIC PUMPGroup 2 hydraulic pump, left rotation, flange: mounting bolts spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, displacement: 25 cm3/rev, capacity (at 1500 rpm): 37,5 l/min, ports "square": suction: 4xM6, spacing 40 mm, discharge: 4xM6, spacing 35 mm Learn More
- ALKP1-Q0-Y-1,6-G0-L1-06 HYDRAULIC PUMPGroup 1 hydraulic pump, left rotation, German flange (2 bolts, spacing 40x40 mm), centering: 32 mm, shaft: flat 5 mm, displacement: 1.6 cm3/rev, capacity (at 1500 rpm): 2.4 l/min, suction ports: thread 3/8", discharge: Φ9 mm Learn More
- ALKP1-Q0-Y-2,1-G0-L1-06 HYDRAULIC PUMPGroup 1 hydraulic pump, left rotation, German flange (2 bolts, spacing 40x40 mm), centering: 32 mm, shaft: flat 5 mm, displacement: 2.1 cm3/rev, capacity (at 1500 rpm): 3.15 l/min, suction ports: thread 3/8", discharge: Φ9 mm Learn More
- ALHP2-B0-X-20-S3-E1-06 HYDRAULIC PUMP0510625065, 2.4539.050.0, 0510625049, R983042121, 2.4539.640.0, 245396400, R918C01480, 20C19X224F Learn More
- ALSG4-40-OK3-C16-PB-01 HYDRAULIC MOTOR (STANDARD)BMM 40, OMM 40, SMM 40, MMS40C, 151G0279 Learn More
- ALHP3-A0-Y-33-T0-L1-06 HYDRAULIC PUMPGroup 3 hydraulic pump, left rotation, flange: mounting bolt spacing 146 mm, centering: 101.6 mm, shaft: conical 1:8, displacement: 33 cm3/rev, capacity (at 1500 rpm): 49.5 l/min, threaded ports: suction: 1", discharge: 3/4"
Cross numbers:
A32L27690, A32L/27690, A32L-27690 Learn More - ALHP2/2-A0-Y-22/12-S1-F1/F1-F-06 HYDRAULIC PUMPGroup 2 hydraulic pump, two-section, left rotation, flange: mounting bolts spacing 106.4, centering: 82.55 mm, shaft: 11 splines Φ 18.63 mm, displacement: 22 + 12 cm3/rev, capacity (at 1500 rpm): 33 l/min + 18 l/min, ports: 1 section "square" suction: 4xM6, spacing 40 mm connected inside the body, discharge: 4xM6, spacing 35 mm, 2 section "square" suction: 4xM6, spacing 40 mm, discharge: 4xM6, spacing 35 mm Learn More
- ALHP2-B2-Y-4-T1-F0-06 HYDRAULIC PUMPGroup 2 hydraulic pump, left rotation, flange: mounting bolt spacing 100x72 mm, centering: 80 mm, shaft: conical 1:5, displacement: 4 cm3/rev, capacity (at 1500 rpm): 6 l/min, ports "square": suction: 4xM6, spacing 40 mm, discharge: 4xM6, spacing 35 mm
Cross numbers:
0510225306, 0510225315, SNP2/4SCO02, 20A4,5X086 Learn More - ALHP3-B1-X-39-T0-L1-07 HYDRAULIC PUMPGroup 3 hydraulic pump, right rotation, flange: mounting bolts spacing 128x98.5 mm, centering: 50.8 mm, shaft: conical 1:8, displacement: 39 cm3/rev, capacity (at 1500 rpm): 58.5 l/min, threaded ports: suction: G1", discharge: 3/4" Learn More
- ALHP3-B1-X-39-T0-E5-07 HYDRAULIC PUMPGroup 3 hydraulic pump, right rotation, flange: mounting bolt spacing 128x98.5 mm, centering: 50.8 mm, shaft: conical 1:8, displacement: 39 cm3/rev, capacity (at 1500 rpm): 58.5 l/min, "diamond" ports: suction: 4xM10, spacing 51 mm, discharge: 4xM8, spacing 40 mm Learn More
- ALHP2/2-B0-X-8/6-T0-L1/L0-E-07 HYDRAULIC PUMPGroup 2 hydraulic pump, two-section, right rotation, flange: mounting bolt spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, displacement: 8 + 6 cm3/rev, capacity (at 1500 rpm): 12 l/min + 9 l/min, ports: 1 section threaded suction: 3/4", discharge: 1/2", 2 section threaded suction: 1/2", discharge: 1/2" Learn More
- ALHP2/2-Q0-Y-16/10-S3-F1/F1-E-06 HYDRAULIC PUMPGroup 2 two-section hydraulic pump, left rotation, flange: German, 2 bolts, centering: 50 mm, shaft: 9 splines, φ 16.5 mm, displacement: 16 + 10 cm3/rev, capacity (at 1500 rpm): 24 + 15 l/min, ports "square": suction: 4xM6, spacing 40 mm, discharge: 4xM6, spacing 35 mm Learn More
- ALHP2/2-A0-Y-20/12-S0-F1/F1-E-06 HYDRAULIC PUMPGroup 2 hydraulic pump, two-section, left rotation, flange: mounting bolts spacing 106.4, centering: 82.55 mm, shaft: 9 splines Φ 15.45 mm, displacement: 20 + 12 cm3/rev, capacity (at 1500 rpm): 30 l/min + 18 l/min, ports: 1 section "square" suction: 4xM6, spacing 40 mm, discharge: 4xM6, spacing 35 mm, 2 section "square" suction: 4xM6, spacing 40 mm, discharge: 4xM6, spacing 35 mm Learn More
- ALHP2/2-B0-X-25/4-T0-L1/L0-E-07 HYDRAULIC PUMPGroup 2 hydraulic pump, two-section, right rotation, flange: mounting bolts spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, displacement: 25 + 4 cm3/rev, capacity (at 1500 rpm): 37.5 l/min + 6 l/min, ports: 1 section threaded suction: 3/4", discharge: 1/2", 2 section threaded suction: 1/2", discharge: 1/2" Learn More
- ALHP2-A0-X-14-T1-L1-06 HYDRAULIC PUMPGroup 2 hydraulic pump, right rotation, flange: mounting bolts distance 106.4 mm, centering: 82.55 mm, shaft: conical 1:5, displacement: 14 cm3/rev, capacity (at 1500 rpm): 21 l/min, threaded ports suction: 3/4", discharge: 1/2" Learn More
- ALHP2/2/2-B0-X-10/10/10-T0-L1/L1/L1-F-07 HYDRAULIC PUMPGroup 2 hydraulic pump, three-section, right rotation, flange: mounting bolt spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, displacement: 10 + 10 + 10 cm3/rev, capacity (at 1500 rpm): 15 + 15 + 15 l/min, threaded ports suction: 3/4" connected inside the body, discharge: 1/2" Learn More
- ALHP2/2-B0-X-20/12-T0-L1/L1-E-07 HYDRAULIC PUMPGroup 2 hydraulic pump, two-section, right rotation, flange: mounting bolt spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, displacement: 20 + 12 cm3/rev, capacity (at 1500 rpm): 30 l/min + 18 l/min, ports: threaded suction: 3/4", discharge: 1/2" Learn More
- ALHP2/2-B0-X-14/6-T0-L1/L0-F-07 HYDRAULIC PUMPGroup 2 hydraulic pump, two-section, right rotation, flange: mounting bolts spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, displacement: 14 + 6 cm3/rev, capacity (at 1500 rpm): 21 l/min + 9 l/min, ports: 1 section threaded suction: 3/4" connected between sections, discharge: 1/2", 2 section threaded suction: 1/2", discharge: 1/2" Learn More
- ALHP2/2-Q0-X-12/12-S3-F1/F1-E-06 HYDRAULIC PUMPGroup 2 two-section hydraulic pump, right rotation, flange: German, 2 bolts, centering: 50 mm, shaft: 9 splines, φ 16.5 mm, displacement: 12 + 12 cm3/rev, capacity (at 1500 rpm): 18 + 18 l/min, ports "square": suction: 4xM6, spacing 40 mm, discharge: 4xM6, spacing 35 mm Learn More
-
- ALSU-4-400-17-E-01 POWER STEERING UNIT (ORBITROL)OSPB400LS, OSPC400LS, 150-0105, 150-1240, 150-8067, HKUS400/5T Learn More
- ALHM2-B0-Z-8-T0-L0-Q1-06 HYDRAULIC MOTORGroup 2 hydraulic motor, bi-directional, flange: mounting bolt spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, working capacity: 8 cm3/rev, threaded ports: inlet: 1/2", outlet: 1/2", leakage drain in rear cover 1/4". Learn More
- ALHM2-B0-Z-12-T0-L4-Q1-06 HYDRAULIC MOTORGroup 2 hydraulic motor, bi-directional, flange: mounting bolt spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, working capacity: 12 cm3/rev, threaded ports: inlet: 3/4", outlet: 3/4", leakage drain in rear cover 1/4". Learn More
-
-
- ALSG3W-250-K125-S10-01 HYDRAULIC MOTORBMSW 250, OMSW 250, SMSW 250, MSW250K, 151F0233, 151F0533 Learn More
- ALSG6-160-KW4-C40-01 HYDRAULIC MOTOR (STANDARD)BMT 160, OMT 160, SMT 160, MT160C, EPMT160C, 151B0200, 151B3000 Learn More
- ALSG6-200-KW4-C40-01 HYDRAULIC MOTOR (STANDARD)BMT 200, OMT 200, SMT 200, MT200C, EPMT200C, 151B0201, 151B3001 Learn More
- ALSG6-250-KW4-C40-01 HYDRAULIC MOTOR (STANDARD)BMT 250, OMT 250, SMT 250, MT250C, EPMT250C, 151B0202, 151B3002 Learn More
-
- ALSG4-40-OK3-C16-PT-01 HYDRAULIC MOTOR (STANDARD)BMM 40, OMM 40, SMM 40, MM40C, 151G0277 Learn More
- ALHM2-B0-Z-10-T0-E0-Q1-06 HYDRAULIC MOTORGroup 2 hydraulic motor, bi-directional, flange: mounting bolt spacing 96x71.5 mm, centering: 36.5 mm, shaft: conical 1:8, working capacity: 10 cm3/rev, ports: inlet "diamond": 4xM6, spacing 30 mm, outlet: 4xM6, spacing 30 mm, leakage drain in the rear cover 1/4". Learn More
- SEALS KIT FOR ALSG6-XXX-XX-C40-01 HYDRAULIC MOTORTHE SET INCLUDES:
1x DUST SEAL 45x52x3
1x SHAFT SEAL 45x65x7
1x O-RING 90x2,65
2x O-RING 109,5x2
1x O-RING 70x2
1x O-RING 45x2 Learn More - ALPK-ML2-ZAT-3,8-A-SP2-09 MULTIPLICATORSPEED INCREASER GEARBOX FOR PUMPS GR.2 WITH EUROPEAN UNIFIED FLANGE, COMES WITH COUPLING Learn More
My Favorites
Last Added Items
You have no items in your Favorites.
Search Brands All Brands
Featured Brands
